Salty Captain Bilge Bandit is your go-to solution for effectively cleaning and deodorizing your boat's bilge and engine compartment. This powerful cleaner is specially formulated to tackle tough grime, oil, grease, and unpleasant odours, ensuring a fresh and clean environment in the areas that need it the most.

Shop more of the Salty Captain range at Anaconda, instore and online today.

Note: Always read and follow the instructions and safety precautions provided on the product packaging. Bilge Bandit is for external use only. Avoid contact with eyes and prolonged skin exposure. In case of contact, rinse immediately with plenty of water. Keep out of reach of children.

Features

Efficient Cleaning: The powerful formula of Bilge Bandit ensures efficient cleaning, saving you time and effort in maintaining a clean and odour-free bilge and engine compartment.
Enhanced Boat Maintenance: By regularly using Bilge Bandit, you can prevent the buildup of grime, oil, and grease, promoting the overall longevity and performance of your boat's bilge and engine components.
Fresh and Pleasant Environment: Say goodbye to unpleasant odours and enjoy a fresh and clean environment in your boat. Bilge Bandit's deodorizing properties eliminate foul smells, leaving your boat smelling great.
Versatile Application: Bilge Bandit can be used not only in the bilge area but also in the engine compartment, ensuring a thorough cleaning and freshening of critical areas.
Safe for Marine Life: Rest assured that Bilge Bandit is environmentally friendly, allowing you to clean your boat without harming the waterways or marine ecosystem.

How to use Bilge Bandit - Bilge & Engine Cleaner
1. Preparation: Ensure that your boat is in a stationary position and that the bilge and engine compartment are accessible for cleaning.
2. Dilution: Dilute Bilge Bandit as per the recommended ratio mentioned on the packaging. Typically, 1L of Bilge Bandit per 25ft of the boat is necessary. Direct spray onto the engine components with no dilution is acceptable
3. Application: Pour the diluted Bilge Bandit solution into a spray bottle or directly onto the areas that need cleaning. Ensure thorough coverage of the bilge surfaces, engine components, and any other areas requiring attention.
4. Agitation: Use a brush, sponge, or bilge scrubber to agitate the solution and loosen dirt, grime, oil, and grease. Pay special attention to corners, crevices, and hard-to-reach areas where buildup tends to occur.
5. Soaking: Allow Bilge Bandit to soak on the surfaces for a few minutes to effectively break down and dissolve the contaminants. This allows the cleaner to penetrate and lift stubborn dirt and odours.
6. Rinse: After the soaking period, thoroughly rinse the bilge and engine compartment with clean water. Use a hose or a bucket of water to flush out the loosened dirt and residue. Ensure all traces of the cleaner and contaminants are washed away.
7. Repeat if necessary: For heavily soiled areas or persistent odours, you may need to repeat the cleaning process. Apply undiluted Bilge Bandit directly to stubborn spots and use a brush or sponge to scrub and loosen the residue before rinsing again.
8. Dispose of wastewater properly: Ensure that the wastewater from the cleaning process is disposed of properly, following local environmental regulations and guidelines.

EAN

9358020002261